Yamaha CDC-600BL Stereo System User Manual


 
English
5 En
INTRODUCTION
CONTROLS AND FUNCTIONS
1 Infrared signal transmitter
Sends infrared signals to this unit.
2 STANDBY/ON
Turns this unit on or to the standby mode while
(Power) on the front panel is pressed inward to the ON
position.
You can operate this unit only when the (Power) on the front
panel is pressed inward to the ON position.
3 CD/USB
Switches between CD mode and iPod/USB mode (see
page 9).
y
This setting is retained even if you turn off this unit.
4 PROGRAM
Turns on or off the program playback mode. See
“Program playback” on page 8.
5 DIMMER
Each time you press DIMMER, the brightness level
changes by 4 levels.
y
This setting is retained even if you turn off this unit.
6 Numeric buttons
Use to select directly a track on the disc or a file in the
current folder.
7 (Search backward), (Search
forward)
Searches tracks backward/forward while the button is
pressed.
8 (Skip backward), (Skip forward)
: Skips to the next track.
: Skips back to the beginning of the current track.
(twice): Skips to the previous track.
9 FOLDER (Folder down), (Folder up)
: Skips to the previous folder.
: Skips to the next folder.
Refer to page 9 for details.
0 DISC SKIP (Previous disc), (Next disc)
Skips to the previous/next disc.
A MODE
Switches the disc play mode between 1DISC mode and
5DISC mode.
In 1DISC mode, only the selected disc is played back.
In 5DISC mode, all discs on the tray are played back in
sequence.
B OPEN/CLOSE
Opens or closes the disc tray. You can load or replace five
discs at a time. See page 8 for details.
C PURE DIRECT
Turns on or off the PURE DIRECT mode to improve
audio quality. See page 2 for details.
y
This setting is retained even if you turn off this unit.
D RANDOM
Turns on or off the random sequence playback mode.
The random playback mode is canceled when the disc is ejected.
Remote control
Note
Note
Data Disc USB