Filter
Top Products
49
XM SATELLITE RADIO TUNING
BASIC
OPERATION
■ Status and error messages
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
Message Cause Remedy
CHECK ANTENNA
The XM Connect and Play digital antenna
accessory is not connected, or does not work
properly.
• Check the XM Connect and Play digital antenna
accessory connections.
UPDATING
The XM user encryption code is being updated. • Wait until the encryption code is updated.
NO SIGNAL
The signal is too weak. • Check the XM Connect and Play digital antenna
accessory connections and orient it for the best
reception.
LOADING
It takes longer than four seconds for audio or
text data to be decoded.
• Wait until the decoding process has finished.
OFF AIR
The XM Satellite Radio channel you selected is
not currently broadcasting any signal.
• Check the channel number again or select another
XM Satellite Radio channel.
<XM> - - -
The channel Station ID (SID) is no longer
available.
- - - / - - -
No artist name/feature or song/program title is
available.
<CAT> - - -
No channels are available for the selected
category.
• Select another channel category by pressing
CATEGORY (or A-E/CAT. j / i on the remote
control) repeatedly.