Filter
Top Products
6
ENGLISH
CAUSE
XM terminal and the XM Connect-and-
Play antenna is not properly connected.
The signal cannot be received.
The XM Tuner is not activated.
SYMPTOM
“CHECK ANTENNA” is
displayed.
“NO SIGNAL” is displayed.
Receiving only XM channels 0
and 1.
REMEDY
Check that the connection are correct.
Reposition your XM Connect-and-Play antenna.
Contact XM Radio.
TROUBLESHOOTING
If a problem should arise, first check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the operating instructions?
3. Are the speakers and other components operating properly?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
06.1.16, 4:44 PMPage 6