XM Satellite Radio SR9600A Satellite Radio User Manual


  Open as PDF
of 6
 
5
ENGLISH
PRESET MEMORY
You can store the desired channel in the Preset
Memory.
(Using the SR9600)
1.
Tune into the desired channel.
2.
Press the MEMORY button on the front panel.
“PRESET – –“ (preset number) starts blinking
on the display.
3.
Select the preset number by rotating the
GYRO TUNING dial, while it is still blinking
(approx. 5 second)
4.
Press the MEMORY button again to enter.
The display stops blinking.
The Channel is now stored in the specified
preset memory location.
(Using the remote control unit)
1.
Tune into the desired channel.
2.
Tap the Memo on the remote control unit.
“PRESET – –” (preset number) starts blinking
on the display.
3.
Enter the desired preset number by tapping
the numeric keypads.
Note
• When entering a single digit number (2 for
example), either input “02” or just input “2”
and wait for a few seconds.
2/2 XM
XM : Key
wed Jun 01 4:40pm
2.
3.
MULTIMULTI
SPEAKERSPEAKER
F/PF/PBANDBANDTHXTHXPURE DIRECTPURE DIRECT UPUP
DOWNDOWN
TUNINGTUNING
AUX 1 INPUT
RAUDIO
DIGITAL S-VIDEO
LVIDEO
POWER ON/STANDBY
VOLUME
UPDOWN
INPUT SELECTOR
PHONES
STANDBY
AV SURROUND RECEIVER SR9600
SURROUNDSURROUND
MICMIC
ENTERENTER
MENUMENU
PURE DIRECTPURE DIRECT THXTHX
7.1CH INPUT7.1CH INPUT
MODEMODE AUTOAUTO
MULTIMULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
3.
2. 4.
CHECKING THE PRESET CHANNEL
The preset channel can be checked on the on
screen display.
(Using the remote control unit)
1.
Tap the Info. to view a list of tuner preset
channel on the on screen display.
2.
If there are 10 or more preset channel, tap the
Info. again.
Note
• The preset channel indication disappears in about
5 sec.
PRESET SCAN
(Using the remote control unit)
1.
Tap the P-Scan on the remote control unit.
”PRESET SCAN” appears on the display and
then the preset station with the lowest preset
number is recalled first.
2.
Preset stations are recalled in sequence (No. 1→
No. 2→ etc.) for about 5-10 seconds each. The
time changes by the received condition. No
stored preset number will be skipped.
3.
You can fast forward through the Preset
stations by tapping the Preset continuously.
When the desired preset station is received,
cancel the preset scan operation by tapping
the CLR or P-Scan.
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
1.
Recall the preset number to be cleared with
the method described in “RECALLING A
PRESET CHANNEL”.
2.
Press the MEMORY button on the front panel
or tap the Memo on the remote control unit.
3.
The stored preset number blinks in the display
for 5 seconds. While blinking, press the
CLEAR button on the front panel or tap the
CLR on the remote control unit.
4.
“xx CLEAR” appears on the display to
indicate that the specified preset number has
been cleared.
Note
• To clear all stored preset channels, press and hold
the CLEAR and the F/P buttons for two seconds.
• There are 50 preset channels prepared at the
factory default. The 50 channels are all set to
“CHANNEL 001”. Each channel can be stored in
the preset memory. You can search for only the
preset channels.
1/2 XM
XM : Main
wed Jun 01 4:40
pm
1.
2.
1/2 XM
XM : Main
wed Jun 01 4:40
pm
1.
3.
3.
2/2 XM
XM : Key
wed Jun 01 4:40
pm
2. 3.
MULTI
SPEAKER
F/PF/PBANDBANDTHXPURE DIRECT UPUP
DOWN
TUNING
AUX 1 INPUTAUX 1 INPUT
RAUDIO
DIGITALDIGITAL S-VIDEOS-VIDEO
LVIDEVIDEO
POWER ON/STANDBY
VOLUMEVOLUME
UPDOWNDOWN
INPUT SELECTOR
PHONES
STANDBY
AV SURROUND RECEIVER SR9600
SURROUND
MICMIC
ENTER
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
3.2.
1 XM001 Preview
NO .
2 XM001 Preview
NO .
3 XM001 Preview
NO .
4 XM001 Preview
NO .
5 XM001 Preview
NO .
6 XM001 Preview
NO .
7 XM001 Preview
NO .
8 XM001 Preview
NO .
9 XM001 Preview
NO .
TUNER PRESET L I ST
2/2 XM
XM : Key
wed Jun 01 4:40
pm
3.
06.1.16, 4:44 PMPage 5
 previous