Xantech PA435X Stereo Amplifier User Manual


 
Page 14 Model PA435X
© 2003 Xantech Corporation
The Remote Amp CO1 & CO2 (Remote Control Jack) from the MRC88 allows for individual Zone control
directly from the Zone 7 & 8 keypads of the MRC88 system. When any one of the zones is turned on, the
PA435X is powered ON. Similarly, when either Zone is powered down, the associated amplifier pair on the
PA435X is put into STANDBY Mode. When both Zones (7 & 8) are powered down, the PA435X will either go
into STANDBY Mode on both amplifier pairs or will be POWERED OFF depending upon the position of the
front panel POWER/STANDBY button (IN = STANDBY; OUT = ON/OFF).