Filter
Top Products
- 2 -
HOW DOES THE SPLCD-MRC-KP GET THE INFORMATION ABOUT THE MRC88m SOURCE
DEVICES?
The information about the source devices is sent from the MRC88m to the SPLCD-MRC-KP via the
normal MRC88m CAT5 keypad connection during the MRC88m startup sequence.
WHERE DOES THE MRC88m GET THIS SOURCE DEVICE INFORMATION?
The source device information that is sent from the MRC88m to the SPLCD-MRC-KP is stored in the
MRC88m Dragon project.
This information is entered into Dragon by the installer during the MRC88m project creation. It is part
of the “Properties” of the Source Button.
HOW DO I CONFIGURE SOURCE 1 ON THE SPLCD-MRC-KP FOR THE XIS100 iPOD DOCK
AND SET THE LABEL TO “iPOD”SO WHAT EXACTLY IS “AUTO-CONFIGURATION”?
1) Start Dragon-Drop.
2) Select the New Project item under the File Menu (“File->New Project”).
3) Open the Audio/Video Distribution project type and select “MRC88m”.
4) Select the “Blank Project” Option, then click “OK”. You should now see the MRC88m Virtual
keypad.