Filter
Top Products
L3-LL User Manual
Chapter 2 – Quickstart Guide
We recommend reading this manual to get the most out of the L3-LL. However, for a quick start to
your audio, follow these steps:
aster
located between the Input and Output meters,
he Attenuation meter.
drag
tions.
8. Process your audio.
setting up the L3-LL on
1. Insert the L3-LL Multimaximizer into your project, preferably as the last processor on the m
buss with no subsequent gain adjustment.
2. Play your audio, selecting a loop with a high RMS level.
3. Select the Threshold/Out Ceiling Link control,
and drag downward while watching t
4. Once the Attenuation meter registers gain reduction, listen carefully and continue to
downward until you hear degradation, distortion, or a reduction in level.
da
5. At this point, stop, and drag upward until the output sound is free of such degra
6. Set the Out Ceiling control to -0.2dBfs.
7. Set the IDR Quantize factor to match your designated medium.
9