Filter
Top Products
Page 13
The X41 has three volume control settings that interact in the following manner:
Transmitter Volume Control for analog inputs (located on the back of the transmitter)
This controls only the volume of the stereo analog inputs and has no effect on the
transmitter digital input volume. That means, if the XBOX is connected to the trans-
mitter’s digital input, the game volume will not be affected by this volume control.
This volume control is only used when the analog inputs are being used (for example
if you’ve connected your TV set to the transmitter) and in most cases it would be set
to maximum. If you’re using the transmitter’s analog inputs and hear distortion in the
headset, the signal might be overloading the transmitter input. If that happens, turn
down the transmitter volume control to reduce the analog input level until the distor-
tion is corrected.
Headset Game Volume Control (located on the headset)
This sets the volume of the game sound transmitted to the headset. It has no effect
on the XBOX LIVE chat volume, which is set independently as described below. If
you’re listening to an analog signal connected to the X41 transmitter (for example,
if you’ve connected your TV to the transmitter), set the transmitter analog volume
control as loud as possible for distortion-free sound and adjust the headset volume to
a comfortable level.
XBOX LIVE Chat Volume Control (located on the XBOX talkback cable)
This controls the chat level heard in the headset during an XBOX LIVE gaming ses-
sion. Set the chat level with this control and adjust the game sound level with the
volume control on the headset. The volume control on the headset has no effect on
the chat volume level, so even if you turn the game volume control all the way down,
you’ll still hear the chat signal if the chat volume control is turned up.
Volume Settings