16
TREMOLO
This effect is based on the highly acclaimed tremolo
circuit found in some guitar amps.
TAP “SPEED” Sets the tremolo speed in a range
of 2.5...10 [Hz].
EDIT 2 “SPEED” This lets you use the knob to make
fine adjustments to the parameter.
EDIT 3 “DEPTH” Adjusts the tremolo depth.
ROTARY
This models a rotary speaker.
TAP “SPEED” Sets the rotational speed of the
speaker in a range of 0.8...10 [Hz].
EDIT 2 “SPEED” This lets you use the knob to make
fine adjustments to the parameter.
EDIT 3 “SENS” By adjusting this parameter you can
make the rotational speed change
automatically in response to the vol-
ume of your guitar. If you use this
function, set the SPEED to a slow
setting.
DELAY
This is a model of one of the most respected ana-
logue tape echo machines ever made. In the original
the “echo” is produced by a playback head and the
exact “delay time” is set by varying the motor speed.
Many professionals prefer these “lo-fi” units because
of the warm, dark echoes they produce.
TAP “TIME” Sets the delay time in a range of
1...1,486 [ms].
EDIT 1 “MIX” Adjust the mix amount of the de-
layed sound.
EDIT 2 “TIME” This lets you use the knob to make
fine adjustments to the parameter.
EDIT 3 “FEEDBACK” Adjusts the amount of feedback.
HINT: In the CHORUS+DELAY combination effect, the
FEEDBACK parameter is already set to the optimal
value.
WARNING! If you crank up the FEEDBACK too much, an
uncontrollable, cascading “runaway” of echoes will oc-
cur. So, use your ears when setting this!
REVERB
A model of the most popular spring reverb system
used in guitar amps.
TAP “TIME” Sets the reverb time in a range of
0.8...8 [seconds].
EDIT 1 “MIX” Adjusts the mix amount of the re-
verb.
EDIT 2 “TIME” This lets you use the knob to adjust
the reverb time.
EDIT 3 “HI DAMP” Adjusts the dampening of the high-
frequency range.
HINT: In combination effects, the TIME and HI DAMP pa-
rameters are already set to optimal values.