Filter
Top Products
11
DELAY TIME: Press the TAP button twice at the de-
sired interval, or hold down the TAP
button and turn EDIT 1.
DELAY LEVEL: Turn EDIT 1 (without pressing any
button).
DELAY FEEDBACK: Turn EDIT 1 while holding down the
BYPASS button.
HINT: For details on the effects, refer to “Styles and effects”
(page 12).
Adjusting the noise reduction
Here’s how to adjust the noise reduction
HINT: When you use a high-gain amp type such as “HIGAIN
1,” “HIGAIN 2” or “HIGAIN 3,” we recommend that
you use noise reduction.
1. Press the BYPASS button to make the BYPASS LED
light.
2. Hold down the TAP button and turn the EDIT 1 knob
to adjust the noise reduction sensitivity. Turning the
knob toward the right will produce greater noise re-
duction (less noise). If you turn the knob all the way
to the left, noise reduction will be off (more noise).
NOTE:Depending on the guitar you’re using, excessively high
noise reduction settings may cause notes to be cut off in
an unwanted manner!
NOTE:When you select a different type of sound, the noise re-
duction setting is automatically configured to its initial
value to accommodate the selected amp sound Style.
3. If you want to use effects, press the BYPASS button
to make the BYPASS LED go dark and the effect(s)
will be heard.