Filter
Top Products
9
HINT: You can also adjust the speed or time, by holding down the TAP button and
turning the EDIT 1 knob. (This is the EDIT 2 mode)
NOTE: If the BYPASS LED is lit, you won’t be able to use the TAP switch to set the
time. (The TAP LED will be dark.)
BYPASS (EDIT 3) and LED
If you don’t want to use an effect, press this button to turn the effect off (i.e.,
bypassed). If the effect is bypassed, this LED will be lit.
NOTE: You can’t adjust the effect parameters if the BYPASS LED is lit.
HINT: While the effect is bypassed, you can adjust the noise reduction sensitivity by
holding down the TAP button and turning the EDIT 1 knob.
HINT: The bypass setting is remembered even when you switch modes, switch pro-
grams or turn off the power.
HINT: The Bypass button can be used to modify effect parameters (EDIT 3). Press
and hold Bypass and simultaneously turn the EDIT 1 knob. See the chart on page 20
for what parameters can be controlled.
4. PRESET/MANUAL/CHANNEL SECTION
PRESET and LED
This button puts your amp into Preset mode and you can use the STYLE selector
to select a “typical” setting for each type of amp sound. If the PRESET LED is lit,
you’re in Preset mode!
MANUAL and LED
This button puts your amp into Manual mode which means the physical position of
each knob (except for the EDIT 1 knob) determines exactly what you will hear.
This means that the amp will operate just like a conventional guitar amp. If the
MANUAL LED is lit, you’re in Manual mode.
CH (Channel), CH1/CH2 LEDs
This button switches between the two channels and the LED of the selected chan-
nel will light. In Preset or Manual mode, the CH1 and CH2 LEDs will be dark. If
from either of these modes you then press this CH button, you’ll switch to Channel
Select mode, and the channel (CH1 or CH2) that you selected most recently will
become active.
WRITE button
Use this button to save a new program into CH1 or CH2. Refer to “Storing your
program” (page 15).
5. POWER SWITCH
When the power is on, the indicator located above the switch will be lit.