Filter
Top Products
25
4. There’s no sound from the LINE/PHONE jack when you use it.
➢ Check that the top panel MASTER volume isn’t turned all the way down.
➢ Make sure sound is coming from the amp.
IMPORTANT NOTE: You’ll need to unplug your headphones or cable from the LINE/
PHONE jack to do this, since plugging something into this jack automatically mutes
the amp’s speakers. If there’s still no sound from the amp, go to page 24 “There’s no
sound coming from the amp.” If you do hear sound, check the headphones or cable
you are hooking up to this jack.
5. You can’t hear any effects.
➢ Check that the BYPASS LED isn’t lit. If it is lit, the effect is bypassed. Press the
BYPASS button to disengage it; the BYPASS LED will go off.
➢ Is the EDIT 1 knob turned down too low? Adjust the EDIT 1 knob.