Filter
Top Products
20
1. DIGITAL KEY CONTROL - Adjust the key of your source music
in half-step increments to match the natural range of your
voice using these buttons.
Flat - lower the key.
Sharp - raise the key.
Natural - return to the original key of the music input
source.
You will see the DISPLAY reflect the KEY CONTROL step you
have selected. The increase in numbers for both flat ( ) and
sharp ( ) represent an increase in amount of key change from
the original or natural, 1 being the least amount, 4 being the
most.
2. LOUD (LOUDNESS CONTROL) - For an instant music Volume/
Gain, the LOUDNESS button is an easy way to improve your
mix when you need an extra boost. Perfect for varying volume
controls between tracks or singers.
3. TALK OVER - Turning this setting on will instantly reduce the
volume of the the music while any MIC on any of the three MIC
INPUTS are in spoken or sung into. The volume will gradually
fade-in once the microphone is no longer in use.
4. INPUT - This button allows you to select between BGM, DVD,
CD and AUX player output to the DA-3800 PRO. This allows
the DA-3800 PRO to differentiate between all the related
source AUDIO INPUT options available on the back panel. If the
button is held for approximately one second, the AUTO setting
will be selected and highlighted on the display. This
mode will
have the DA-3800 PRO automatically switch to BGM when the
signal from DVD, CD or AUX is stopped.
5. ECHO - This control is the overall level for the ECHO effect on all
three MIC INPUTS. Use the to increase the ECHO effect and
the to reduce the ECHO effect. You will see the controls on
the DA-3800 PRO move as you make adjustments using the
remote keys.
6. MIC VOLUME - Use the to raise the MIC MASTER VOLUME
and the to lower this mixed MIC MASTER VOLUME. You
will see the controls on the DA-3800 PRO move as you make
adjustments using the remote keys.
7. MUSIC VOLUME - Use the to raise the MUSIC VOLUME and the to lower the MUSIC VOLUME.
You will see the controls on the DA-
3800 PRO move as you make adjustments using the remote keys.
The maximum operating distance between the Remote Control and the REMOTE SENSOR is approximately
23 feet. If the effective distance of the Remote decreases, replace the batteries. To install new batteries,
remove the battery compartment lid on the back of the Remote and insert two AA batteries with polarities
aligned.
Remote Control
Descriptions and Functions