Filter
Top Products
Finalizing a Disc
After you have finished recording onto a disc, you will need to FINALIZE it so that it will be compatible with
standard disc players. If a disc has not been finalized, it can only be played back in the CDR-1000 PRO.
NOTE: The CDR-1000 PRO must be in Playback Mode in order to finalize a disc. Make sure it is not in
Record Mode.
Follow these steps to successfully FINALIZE your disc.
1. Insert the disc into the CDR-1000 PRO’s disc tray and close the tray.
2. If in Record Mode, press the STOP button to enter Playback Mode. The Finalizing function only works in
Playback Mode
3. Press the FINALIZE button.
4. The display screen will ask you if you want to continue with the finalizing process. Press the START
button to begin finalizing. The display screen will say “FINALIZING” until the process is finished. The display
will show how much time is left in the Finalizing process.
When the disc has been finalized, it is ready to be played in standard CD players. I.e. Car stereos, CD-
ROM compatible drives, home stereos, etc.
NOTE: You will not be able to burn any more music onto a disc once it has been finalized.
Erasing the Contents of a CD-RW
The ERASE function only works on CD Rewritable (CD-RW) discs.
Follow these steps to successfully ERASE the contents of your CD-RW disc
1. Insert the CD-RW disc into the CDR-1000 PRO’s disc tray and close the tray.
2. If in recording mode, press the STOP button to enter Playback Mode. The Erasing function only works
in Playback Mode
3. Press the ERASE button. The LCD display will ask you if you are sure you want to ERASE.
4. Press the START button to begin erasing the data from the CD-RW disc. The display will show how
much time is left in the erasing process.
NOTE: The erasing process cannot be cancelled once it has begun so be sure that you want to erase the
disc.
Disclaimer: VocoPro will not be held liable for any erased data.
. (**PIC of the display showing this info)
Operations cont.
11
OUTPUT
LEFT RIGHT
BAL
UNBAL BAL UNBAL
ANALOG i/O INPUT DIGITAL
AC INPUT
~90V-24V~50/60HZ
LEFT RIGHT INPUT
BAL UNBAL BAL UNBAL S/PDIF
LA VERNE, CALIFORNIA U.S.A.
www.vocopro.co
m
CDR-1000 PRO