Viking Electronics E111 Stereo Equalizer User Manual


 
Frequency Response
±ldB, 20Hz to 20kHz
Total Harmonic Distortion
Less than 0.2% at 1kHz, all sliders at 0
position, rated output
Equalization Center Frequencies
From 31.5Hz to 16kHz
peaking type
31.5Hz (22Hz to 44Hz)
63Hz (44Hz to 88Hz)
125Hz (88Hz to 176Hz)
250Hz (176Hz to 350Hz)
500Hz (350Hz to 700Hz)
1kHz (700Hz to 1.4kHz)
2kHz (1.4kHz to 2.8kHz)
4kHz (2.8kHz to 5.5kHz)
8kHz (5.5kHz to 11kHz)
16kHz (11kHz to 22kHz)
Range of Adjustment of "Q"
1.5 to 8
Equalization Control
±12dB
Input Level Control
±12dB
Rated Input Level
+4dB
Rated Output Level
+4dB
Maximum Input Level
+24dB* at 1kHz
Maximum Output Level
+24dB* with 600-ohm load
Input Impedance
10k ohms
Output Impedance
600 ohms
High Pass Filter
40Hz, 12dB/octave
Low Pass Filter
12kHz, 12dB/octave
Hum and Noise
-103dB* (EQ IN, all sliders at 0 position, A
curve by IHF)
Protect
AC fail safe
Power Consumption
E 111: 10W
E
112:
19W
Dimensions
483(W)×l33(H)×370(L) mm
19(W)×5.25(H)×l4.6(L) inches
Weight
E 111: 7.6kg (17 lbs)
E 112: 8.8kg (19 lbs)
Finish
Black
Indicators
Peak Indicator LED turns on at 6dB before
clipping
EQ, Power Indicators Green Color LED
Accessories
AC Cord, Cord Clamp
*0dB is referenced to 0.775 volts RMS.
— 3 —
Specifications
Appearance
The E 111 is the same in dimension as the E 112.