Filter
Top Products
Precautions
................................................
1
General
Description
........................................
2
Features
...................................................
2
Specifications
.............................................
3
Appearance
................................................
3
Performance
Graphs
.......................................
4
Front
Panel
................................................
5
Rear
Panel
.................................................
6
Input/Output
Connections
..................................
7
Installation
Precautions
..................................
7~8
Functions
..................................................
8
Applications
.............................................
9~10
1. XLR type audio connectors are wired as follows.
Pin 1 is ground (shield), pin 2 is cold (low, minus), and pin 3 is hot (high,
plus).
2. Each model of the E 111 and E 112 has two versions, 120V AC operation only
and 220/240V AC operation with a voltage selector. The voltage selector on
the rear panel of the 220/240V version should be checked for proper setting
prior to operation as improper setting causes trouble. The voltage selector is
set for 240V operation at the factory.
3. Do not operate the equalizer from power mains which exceeds the indicated
mains voltage by more than 10%.
4. Do not expose the equalizer to corrosive chemicals or liquids such as soft
drinks, salt water, etc.
5. Always refer the equalizer to qualified technical service personnel. There
are no user serviceable parts inside.
— 1 —
Contents
Precautions