Venturer ASR150 Home Theater System User Manual


 
6
CONNECTIONS
Notes:
Before you plug in the unit, make sure that the rated voltage of your unit matches your local voltage.
Keep your hands dry when you are connecting the power cord to the wall outlet to avoid electric shock.
When you are not going to use the unit for a long period of time, disconnect the power cord.
When the player is in the standby mode, it is still consuming some power. If you wish to disconnect the unit
completely from the power, unplug the power cord from the AC outlet.
To prevent electric shock, match wide blade of plug to wide slot, fully insert. (For USA and Canada only)
IMPORTANT : Switch off the power before connecting equipment.
The speaker cords have been color-coded to simplify connection. Just plug the speaker wire into the
corresponding jacks on the rear of the unit, matching the color tube on the end of the speaker wire to
the color-coded connector.
Caution:
To prevent damage to the unit, be sure to turn off the unit before making any connection.
Connecting speakers other than the speakers supplied with the unit may damage the unit.
1. Mark the correct mounting position on the wall.
2. Insert a fixing screw(s) at the marked position on the wall.
3. Align the slot hole(s) of the speaker over the screw and pull the speaker
downward until it is firmly hooked.
POWER CONNECTION
CONNECTING THE SPEAKERS & SUBWOOFER
MOUNTING THE REAR SURROUND SPEAKERS