Filter
Top Products
12
PA966/967 User's Manual
Using the Built-in Scanner
You must run software that can access the scanner
in order to operate and/or test it. This can be the
Scanner Settings tool (My Computer > Control
Panel > Scanner Settings), Scan2Key.exe (My
Computer > Windows > Scan2Key.exe; by default
a hidden file), or a custom application.
The PA966 has an integrated 1D or 2D scanner
which will read all major barcodes. Trigger keys
are located on the left and right sides of the
screen. When the scanner is active press either of
these to scan for barcode data or capture an
image (2D scanner only).
Left
Trigger
Right
Trigger
Scan2Key
While Scan2Key is running data from barcodes will input as a keypad entry. To test, open the
WordPad text editor and note the cursor location. As you aim and trigger the scanner you will
hear a scan confirmation beep and see the data appear in WordPad.
Modifying the Scanner Settings
Sometimes the PA966’s default scanner settings are inappropriate for a
particular situation. In this case, the next several pages will guide you in
customizing you PA966’s scanner output.
In Control Panel, click Scanner Settings to run the settings utility.
The screen to the right appears with the following tabs:
Each of these topics are discussed in detail below, beginning with Settings.
Settings
Test
To Kpd
Version
•
•
•
•