Uniden PRO630XL Radio User Manual


 
UNIDEN Model PRO630XL
15
Mounting the MIC Hanger
MIC Hanger mounted over MIC Cable
The curly cord of the Standard Microphone can extend up to 1.5m.
For practical installation of the MIC Hanger mounted over MIC Cable use this method
with the Extension Cable.
Plan the location of the MIC Hanger to be within 2m of the Radio (IE: the
length of the extension cable.) Connecting more than one extension cable together
may compromise the audio performance of the microphone.
The plug of the extension cable connects to the Radio. The socket end of the extension cable
connects with the microphone plug.
1. The rubber collar (dust cover) on the microphone cable is not required and can be
pushed out of the way along the cable.
2. Drill a 13mm hole at the MIC Hanger location.
3. Thread the microphone plug through the hole and connect with the extension cable.
4. Mount the MIC Hanger over the hole and cable.
5 At the Radio: Remove the Rear MIC Jack label and connect the extension cable plug.
6. Place the Rubber Bushing (Dust Cover) over the unused Front MIC Jack. Push the edges of
the Dust Cover to t over the Jack opening.
(1) Rubber Collar
(Dust Cover)
Standard
Microphone