Filter
Top Products
1. Select a location that is convenient for operating the radio, but does
not interfere with the driver or passenger.
2. Install bracket with self-tapping screws provided.
3. Connect wiring. (See instructions for Connecting the Power Cords.)
4. Attach the microphone bracket to the side of the radio.
5. Attach radio to bracket.
MOBILE STATION ANTENNA
Because the maximum power output of the transmitter is limited by the FCC,
the quality of your antenna is very important. To achieve the maximum
transmission distance, we strongly recommend that you install only a high
quality antenna. You have just purchased a superior transceiver - don’t
diminish its performance by installing an inferior antenna.
Only a properly matched antenna system will allow maximum power transfer
from the 50 ohm transmission line to the radiating element.Your Uniden
dealer is qualified to help you select the proper antenna for your
requirements. A whip style antenna may be used for
automobile installation.
A short ‘loaded’ whip antenna is easier to install on
an automobile. However, the efficiency of the short
whip antenna is less than that of a full quarter-wave
whip antenna.
MARINE INSTALLATION
Consult your dealer for information regarding marine installation. It is
important to adequately ground the system and to prevent electrolysis
between the fittings in the hull and the water.
4
Installation
Plan the location of the transceiver and
microphone bracket before beginning installation.
MOBILE STATION INSTALLATION
UC343FH 10/23/03 2:32 PM Page 4