Filter
Top Products
GETTING STARTED[ 16 ]
1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press 4 or press three times to select ¨
Dial¨.
3) Press select to toggle between ¨
Tone¨ and ¨Pulse¨ for
each setting.
4) Press end or return the handset to the base unit. The handset returns to the
standby mode.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call.
If the call connects, leave the setting as is, otherwise set for pulse dialing.
• If your phone system requires pulse dialing and you need to send the DTMF tones for
certain situations during a call, you may "switch-over" to tone dialing. (Refer to
"Tone Dialing Switch-over" on page 19.)
Setting the Language
1) When the phone is in the standby mode, press and hold
cid/menu. The following screen appears.
2) Press 5 or press four times to select ¨
Language¨.
3) Press select to toggle between ¨
Eng¨ and ¨Fr.¨ for each
setting.
4) Press end or return the handset to the base unit. The handset returns to the
standby mode.
EXT176 7/30/2 11:10 AM Page 16