Uniden EXAI 7248 Headphones User Manual


 
[33] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
7) Press the set key to select the minute.
8) Press the or /volume/select key until you hear the correct AM or PM setting.
The message counter displays [ ] or [ ].
9) Press the set key to select the AM/PM setting.
You hear a confirmation tone. Then the announcement "Time" and the day and time are
announced for your review. After a few seconds, the system announces “To set security code,
press menu again.”
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit Personal
Identification Number (PIN) code (01-99). To select a PIN, perform the following steps:
1) With the phone in standby mode, press the menu/clock key twice.
The system announces "Security code," and the current PIN code is announced as it is
displayed on the base. Then the system announces the guidance for setting the PIN code.
2) Press the or /volume/select key until the desired number appears.
3) Press the set key to select the PIN code. You hear a confirmation tone, then the
announcement "Security code" followed by the new PIN code. After a few seconds, the
system announces “To set ring time, press menu again.”
The PIN code is set to
"80" when you purchase
the cordless phone.
note
THE INTEGRATED
ANSWERING DEVICE
EXAI7248.book 33 ページ 2004年1月15日 木曜日 午前11時56分