Filter
Top Products
user manual
QLight™ DP series
QLight DP series manual
page 15
TQ-115DP connector panel functions
1. Signal input – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced,
pin 2 Hot, pin 3 Cold and pin 1 not connected.
2. Signal link – lockable 3-pin XLR line output socket links to additional cabinets. Fully
balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected.
3. Mode switch – lifts the overall gain of the subwoofer by 3dB.
4. Aux – RS232 port used for updating settings or firmware.
5. Fuse – AC line fuse. Replace only with 10A 230V anti-surge fuse.
6. Mains switch – turns AC power on to the unit.
7. AC mains connection - accepts Neutrik PowerCon® 3-pin cable-end connector.
8. Power - Blue LED indicates when AC power is applied to the amplifier module.
9. Limit (low) – red LED indicates limiting threshold of the low frequency section.
INPUT
LINK
MODE
(speech)
(music)
NO SUB
WITH SUB
AUX
Power
Limit LO
Limit HI
FUSE
Model No
Serial No
Star Road, Partridge Green, West Sussex, RH13 8RY England
tel:+44 (0)1403 711447 fax:+44 (0)1403 710155 www.turbosound.com
115-230V
THIS EQUIPMENT MUST BE EARTHED
CAUTION to reduce the risk of fire replace only with same
type and rating of fuse.
T10AL 250V 50-60Hz
1000VA
CAUTION ATTENTION
DO NOT EXPOSE TO
RAIN OR MOISTURE
NE PAS E XPOSER A LA
PLUIE NI A L'HUMIDITE
AVIS utiliser un fusible de rechange de meme type.
space
for
ETL & ETLc
logo
TQ-115DP
123456
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DO CHOC ELECTRIQUE
NE PAS ENLEVER
12
34 6
7
8
9
10
5