Filter
Top Products
user manual
TA-880
TA-880 user manual
Page 32
Flying a single TA-880 trapezoidal cabinet using M10 eyebolts
The simplest method of flying a TA-880H cabinet is with a pair of M10 shoulder eyebolts on
the top, using a third eyebolt on the rear of the cabinet to tilt the cabinet.
1. Remove the two countersunk M10 screws located just behind the sword slots in the top of
the cabinet.
2. Replace these with M10 shoulder eyebolts with a minimum thread length of 20mm (3/4”)
3. Angle the cabinet as necessary using the third eyebolt position on the rear of the cabinet.