Filter
Top Products
user manual
TA-880
TA-880 user manual
Page 31
Tilting Strap
4m
0.59m
The
TS-890 tilting strap is in two parts. The longer part is attached to the tilt strap point on the
flying bar using the buckle at its end. The other part of the strap with the ratchet is hooked
into the tilt strap point on the rear of the bottom enclosure. The free end is then threaded
through the ratchet and the strap tightened to achieve the desired tilt. The tilt strap is
designed to ratchet in both directions so that the amount of tilt on a column may be
increased or reduced incrementally.
The TS-890 tilt strap has a net weight of 2.5kgs (5.5lbs).