Filter
Top Products
2. APPEARANCE
EO1-12030
2. APPEARANCE
2- 1
2. APPEARANCE
< Front View >
(1) Power Switch
This is the switch to turn the power of the POS terminal ON or OFF. The Power LED is illuminated
when turning the power on.
(2) Power LED (Green)
This is the LED to indicate the power ON/OFF status of the POS terminal. Green LED is
illuminated when turning the power ON.
(3) HDD LED (Yellow)
This is the LED for a model with the Hard Disk Drive installed. Yellow LED is illuminated during
the access to the Hard Disk Drive.
(4) Front Panel Lock
This is the lock of the front panel. To lock the front panel, insert the front panel key to the front
panel lock, then turn it clockwise. To unlock the front panel, turn the front panel key
counterclockwise.
(5) Reset Switch
Pressing this switch when the POS terminal hangs up resets the unit.
(6) Volume
Used to adjust the internal speaker volume.
When it is turned to left, the sound volume turns down.
When it is turned to right, the sound volume turns up.
(7) USB5 Connector
Connector for the USB (Universal Serial Bus) interface conforming to USB V2.0/1.1. A USB
Mouse, USB keyboard, etc. can be connected to this connector.
Front Panel Lock
Front Panel
Power LED
HDD LED
CAUTION!
Do not press the Reset Switch unnecessarily. Doing so may cause an error.
#
Cover Catch
POWER LED
HDD LED
Reset Switch
Volume
Power Switch
USB5 Connector
CD-RW Drive
(Option)