Filter
Top Products
8. SPECIFICATIONS
EO1-12030
8.1 Basic Specifications
8- 1
8. SPECIFICATIONS
8.1 Basic Specifications
Item Description
Input voltage AC 100V-240V +10%, -10% 50/60Hz 4.8A-2.3A
DC output voltage DC24V +5%, -5%
AC output voltage AC 100V-240V +10%, -10% 50/60Hz 2.0A-1.0A
Operating temperature 5
°
C to 35
°
C
Relative humidity 10% to 80%RH (no condensation)
Dimensions 315 mm (W) x 466 mm (D) x 112.5 mm (including the rubber feed and
cable cover)
Weight 9.5 Kg (without 2 HDDs, CD, UPS battery, PCI, and packing materials)
Power cord A power cord is not included in this product. Please use one complied
with each country’s safety standard. For details, please contact the
nearest TOSHIBA TEC service representative.
CPU Intel Celeron
1.2 GHz with 256 KB secondary cache
BIOS ROM 1MB Flash ROM
Capacity Standard 128MB (Max. 2GB)
Max. 1GB/slot can be equipped.
RAM
Type DDR SDRAM PC2100, 2.5V unbuffered type, non ECC 184-pin DDR
SDRAM DIMM connector, 2 slots installed
Interface RS-232C x 4, Parallel x 1, USB x 1, Drawer x 2 (24V type), PS/2 x 1,
PCI (Half size slot) x 2, +24V OUT (DIN 3-pin) x 1
Display interface RGB x 1 channel (on-board, standard)
Hard Disk Drive (HDD) Max. 2 units of 3.5-inch HDD (option) can be connected.
CD-RW drive 1 drive (local purchase is required),
CD connection kit required (option)
LAN interface 10 BASE-T, 100 BASE-TX (Wake on LAN support)
Floppy Disk Drive (FDD) USB interface type (local purchase is required.)
Support OS Windows 2000, Windows XP, DOS