Filter
Top Products
26
Playing a DVD or Video CD
Use the bB v Vbuttons to select the title/chapter
you want to view, then press ENTER to start.
Press TOP MENU or MENU to return to the menu
screen.
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating
procedures may differ. Follow the instructions on
the each menu screen. You also may set PBC to
Off (See “PBC” on page 24).
Notes:
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 23).
• DVDs may have a region code. Your receiver does
not play discs that have a region code different from
your unit. The region code for this receiver is 1
(one).
General Features
Note:
• Unless stated otherwise, all operations described
use the remote control. Some features may also be
available on the Setup menu.
MOVING TO ANOTHER TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY while playback is
stopped followed by the appropriate number (0-9) or
use b / B to move to another title.
You can play any title by inputting its number while
playback is stopped.
MOVING TO ANOTHER CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
• Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
• Press SKIP . twice briefly to step back to the
previous chapter/track.
•To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
SEARCH
1. Press and hold REW m or FWD M for about
two seconds during playback.
The receiver will now go into SEARCH mode.
2. Press and hold REW m or FWD M repeatedly
to select the required speed:
DVD disc; X2, X4, X16 or X100
Video CD; X2, X4 or X8
3. To exit SEARCH mode, press PLAY(
22
).
CHANGING THE AUDIO CHANNEL
Press AUDIO repeatedly during playback to hear a
different audio channel (Stereo, Left, or Right).
VCD
VCD
DVD
VCD
DVD
DVD
VCD
DVD