Toshiba SBX4250 Speaker System User Manual


 
16
Subwoofer wireless connection
In order to use the subwoofer, you must pair it with the Sound Bar.
1. Connect the power cord to a wall outlet.
2. Turn on the Sound Bar.
3. Turn the ON/OFF switch on the back of subwoofer to turn on.
4. The Sound Bar and the subwoofer automatically pair up. The indicator is red when the wireless
link is activated.
When the wireless link is deactivated, the Sound Bar will be shown “NO
SUBWOOFER”. You can press and hold the button on the remote control for 8
seconds in HDMI
®
-2 mode. And then, press and hold the WIRELESS LINK button of
the subwoofer for approximately 5 seconds until the red indicator is flash.
The Sound Bar will show “PAIRED” when the Sound Bar and the subwoofer pair up.
For details, please refer to the user manual of your Bluetooth
®
device.
Playing back via Bluetooth
®
enabled devices
1. Press the INPUT button to select Bluetooth
®
mode until the display is shown “BT”.
2. Once the Sound Bar is detected of your Bluetooth
®
enable device. Select the “Toshiba Soundbar”
on your device.
3. Enter the PIN code.
PIN code : 0000
4. When this unit successfully paired with your Bluetooth
®
device, appears “CONNECTED”.
5. Select the desired music and press the PLAY button on your device.
SBX4250KN_IB_V1_R13.indd 16 2012/6/26 14:21:45