Filter
Top Products
13
To fly double combined iQ 18B with the iQ 10 Mid/High unit (with optional trapezoidal
cabinet), the following accessories are required: 2 × SR18/10 Side Rail Kit, 2 × SCB
Beam Kit and JK1 Jointing Kit.
The flown system is assembled as shown in Figure 10g. First, the SR18/10 side rail kit
is screwed to the side of each iQ 18B and iQ 10 cabinet using the screws provided (1).
The JK1 Jointing Kit is slotted between two SCB Beam Kits for botht he top and bottom
(2). The combined SCB Beam Kits are placed above and below the speaker assemblies
(3). The Lynch Pin is inserted into the holes of the side rail kit top and bottom (4) and
the Pin folded to secure it in place (Figure10f, page 12).
Figure 10g
11. Performance Data