Filter
Top Products
12
To fly the iQ 18B with the iQ 10 Mid/High unit (with optional trapezoidal cabinet), the
following accessories are required: SR18/10 Side Rail Kit and SCB Beam Kit.
The flown system is assembled as shown in Figure 10e. First, the SR18/10 side rail kit
is screwed to the side of both the iQ 18B and iQ 10 cabinets using the screws provided
(1). The SCB Beam Kits are placed above and below the speaker assembly (2). The
Lynch Pin is inserted into the holes of the side rail kit top and bottom (3) and the Pin
folded to secure it in place (Figure 10f).
Figure 10f
Figure 10e
10.4. Flying Double iQ 18B and iQ 10