Filter
Top Products
11
To fly two iQ 18Bs, the following accessories are required: 2 × SR18 Side Rail Kit, 2 ×
SCB Beam Kit and 1 × JK1 Jointing Kit.
The flown system is assembled as shown in Figure 10d. The SR18 side rail kit is
screwed to the side of each cabinet using the screws provided (1). The JK1 Jointing Kit
is slotted between two SCB Beam Kits for both the top and bottom (2). The combined
SCB Beam Kits are placed above and below the speaker (3). The Lynch Pin is inserted
into the holes of the side rail kit top and bottom (4) and the Pin folded to secure it in
place (Figure 10c, page 10).
Figure 10d
10.3. Flying an iQ 18B with iQ 10