Filter
Top Products
11. Technical Specifications
Frequency response (1) +/- 3dB 60Hz - 20kHz
Recommended Amplifier Power up to 120 watt / 4 ohm
Power Handling Average(2) Programme Peak (10ms)
60 watt 120 watt 240 watt
Sensitivity (1)
2.83 volt @ 1m 89dB 92dB (half space)
Maximum SPL (3) Average Peak
@ 1m 107dB 113dB
Transformer (i6T AW ICT) Max. Insertion loss 0.9 dB 35Hz – 21kHz +/- 2dB
Primary Taps 60,30,15, 7.5* watt
Voltage Taps 70.7V & 100V
Impedance Nominal 8 ohm
Driver Complement 6.5” (165mm) full range ICT™ Point Source
Crossover Point 7 kHz inductively coupled
Enclosure 11 litre, vented polyethylene
Finish Black/Grey or White
Protective Grille Perforated Aluminium
Connectors 2 x 4mm 5way binding posts
1 x NL4 speakon
Fittings 2 x M8 inserts for Yolk Bracket
4 x M6 inserts on rear of cabinet
Dimensions 344mm (H) x 250mm (W) x 225mm (D)
13.54” (H) x 9.84” (W) x 8.86” (D)
Weight 3.7 Kg (8.1 lbs)
Shipping Dimensions 400mm (H) x 500mm (W) x 300mm (D)
15.75” (H) x 19.69” (W) x 11.8” (D)
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal
or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.