Filter
Top Products
9. Hardware
The i6AW ICT can be wall or ceiling mounted using the MB6 (optional) bracket (fig 1.)
which is designed to offer the maximum flexibility in selecting the desired angles.
The MB6 is supplied with M8 bolts for fixing to the loudspeaker (fig1.& 2). After fixing
the bracket to the wall or ceiling remove the plastic plugs from the top and bottom of
the loudspeaker. Position the cabinet at the required angle as shown and tighten the
M8 Bolts to fix the loudspeaker in position.
The loudspeaker can be mounted either horizontally or vertically using the MB6
bracket (fig1.& 2.). This product has four M6 threaded holes in the rear of the cabinet
for other bracketry.
Fig 1.
Fig 2.
Fig 3.
NOTE: The installation of this product
must be carried out in conformity with
local building codes and standards. If
necessary consult your local safety
standards officer before installing any
product. Alternatively, check any laws
or bylaws.Tannoy will not be held
responsible for any damages caused
by the improper installation of any
bracket or loudspeaker.