Filter
Top Products
6
Sound Features
Preset Equalizer Curves
Press ROCK/CLASSIC, CUSTOM/FLAT, POP/JAZZ on
the main unit or EQ on the remote to toggle among
ROCK / POP / JAZZ / CLASS / CUSTOM / FLAT. The
display shows briefly the selection.
Creating Custom Curve
1. Press CUSTOM/FLAT to select CUSTOM mode.
2. While "CUSTOM" is displayed, press SKIP
FORWARD / SKIP BACKWARD to
cycle among displayed bass- and treble - range
levels.
3. While BAS or TRE is
displayed, adjust
VOLUME to set the
associated gain between
-10 - +10.
BASS BOOST
Press BASS BOOST to turn on/off boosting the bass
frequency.
Muting Audio
Press MUTE on the remote to cut the sound. (Remote
Only)
EN
CD Player
Loading Discs
1. Press SOURCE repeatedly to select CD mode.
2. Press OPEN/CLOSE to open the drawer.
3. Insert up to five discs with label face up. (Press
DISC SKIP to rotate the disc carrier.)
4. Press OPEN/CLOSE to close the drawer.
Loaded disc position icon lights.
Playing Discs
•Press PLAY/PAUSE to begin or pause play,
and STOP to stop play.
• Select a specific disc by pressing DISC 1 - DISC 5.
• Press SKIP FORWARD / SKIP BACKWARD
to select a specific track.
Tip: While playing a CD, press and hold SKIP-
FORWARD or BACKWARD for more than 2 seconds
to search through the CD.
This unit is compatible with
CD-RW/ CD-R discs for play-
back.
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either side
(recordable or labeled side) of a CD-R/RW disc
as this may result in the unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do not
open the disc compartment door while the
disc is being read.
• Do not load an unrecorded CD-R/RW disc into
the unit. This may take a longer time to read
the disc.
• Playback capability for CD-RW discs may
vary due to variations in the quality of
the CD-RW disc and the recorder used to
create the disc.
CD-R / RW
DIGITAL AUDIO SYSTEM RS2600
SIMULTANEOUS PLAY AND LOAD SYSTEM
BAS+08
MUTE
RS2600-EN rev.1 3/1/02 4:20 PM Page 10