Filter
Top Products
5
Display Settings
EN
Display
Showing Demonstration
Not operational in CD mode. Press DEMO/DIMMER
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.
Display Clock / Timer
Setting the Clock
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press SKIP BACKWARD or SKIP
FORWARD to set the hour and then press
CLOCK to shift to minute digits.
3. Press SKIP BACKWARD or SKIP
FORWARD to set the minute.
4. Press PROG./SET to save settings and STOP to quit
setting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press SKIP FORWARD /
SKIP BACKWARD to set the hour and then
press TIMER to shift to minute digits.
3. Press SKIP FORWARD / SKIP BACKWARD
to set the minute.
4. Press TIMER to change to OF (timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off
time setting.
5. Press TIMER to select source. Press SKIP
FORWARD / SKIP BACKWARD
to select between CD /TUNER / TAPE)
6. Press TIMER to set volume. Press volume UP /
DOWN to set desired volume level.
7. Press PROG./SET to save settings or STOP to quit
setting.
Activating the Timer
Press and release TIMER to turn on/off
the timer. The timer is active when the
clock icon is lit.
Adjusting the Display Brightness
1. Press and hold
DEMO/DIMMER for
more than 2 seconds.
2. While the dimmer is displayed, press and release
DIMMER to select the desired level (DIMM 0 - 3).
Sleep Mode
You can select the time interval in minutes before the
unit turns off automatically. Press SLEEP on the
remote to select among OFF, 90, 60, 45, 30, 15 and 5
minutes. (Remote Only)
BASS
SURROUND
DIMM 2
RS2600-EN rev.1 3/1/02 4:20 PM Page 9