Filter
Top Products
Playing a Tape
1. Press SOURCE repeatedly to select TAPE.
2. Press the cassette door to open it.
3. Insert a tape into the door and push the door
closed.
4. Press SKIP BACKWARD or SKIP
FORWARD to position the tape to the
desired starting position.
6. Press PLAY to begin playback .
Tape Counter
You can keep track of tape position with the tape
counter. Press PROG•SET to reset.
Recording
From Tuner
1. Insert a tape into the tape deck.
2. Press SOURCE repeatedly to select TUNER and
to access the desired radio band.
3. Tune to the station to be recorded.
4. Press RECORD to begin recording.
5. Press STOP to end recording.
From CD
1. Insert a tape into the tape deck.
2. Press SOURCE repeatedly to select CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be
recorded.
5. Press RECORD to begin recording.
6. CD begins to play.
7. Press STOP to end recording.
From an Auxiliary Input
1. Insert the cassette into the tape deck.
2. Check that the auxiliary device has been
connected correctly to the GAME •mp3• L / R
/ AUX IN connector on the front of the audio
system.
3. Start playback on the auxiliary device.
4. Press RECORD to begin recording.
5. Press STOP to end recording.
11
EN
Tape Player
MS2200 EN 11/17/03 1:59 PM Page 16