Filter
Top Products
Sampling Tracks
Press INTRO•CT to play the first 10 seconds of
each track on the current disc, all discs in the tray,
or turn INTRO•CT mode off. (Remote Only)
Repeat
Press REPEAT•RDS to repeat the current track,
current disc, all discs, or turn REPEAT mode off.
(Remote Only)
Setting Up a CD Program
You can program the CD player to play up to any
32 tracks on the CDs in the tray.
1. While the CD player is stopped, press
PROG•SET to enter program mode. The
system displays the next available program
number: “- - P:01,” with “- -” flashing,
prompts you for the first track in the program
list.
2. Press SKIP BACKWARD or SKIP
FORWARD to select a track (press DISC
SKIP to select a track from a different disc).
3. Immediately press PROG•SET to assign the
selected track to the program number. After
3 seconds, you are prompted for the next track
in the program list.
(In CD program mode, PROG icon will be lit.)
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE .
Displaying the Program List
1. While the CD player is stopped, press
PROG•SET to enter PROGRAM mode.
2. Press PROG•SET repeatedly to list each track
assignment in the program list.
Deleting Program List
While in PROGRAM mode, press and hold STOP
for 3 seconds. The system displays the message
CLEAR.
8
EN
CD Player
Tips:
• You can create a program of up to 32
tracks.
• Press CD INFO repeatedly to view
elapsed track time, track number, track
remain time and disc remain time.
Note:
You may also press REPEAT•RDS to select
1 disc or all discs before activating INTRO
& MIX functions
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
5 P:01
MS2200 EN 11/17/03 1:59 PM Page 13