Filter
Top Products
EN
21
20
Advanced Sound Control
Advanced Sound Control
Dolby 3 Stereo
The 3 Stereo mode will redirect the Surround signals to the
front left and right speakers when only the front and
center speakers are used.
.
Stereo
The Stereo mode uses the two main channel outputs
from the front speakers. Use this mode if you have
connected the front speakers only.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real
environment such as (ARENA/ JAZZ CLUB / THEATER /
STADIUM / DISCO). DSP automatically converts analog
audio signals to digital ones which enables you to adjust
the sound without degrading the sound quality.
Different modes will give you different feels of size and
types of listening environment.
Night Mode
By using Dynamic Range Control technology, you can
enjoy enhanced Dolby Digital sound quality at night
without interrupting your roommates or neighbors.
Night Mode will compress the difference between
normal voices and sounds such as explosions, while still
enjoying a Dolby Digital enable component (DVD, SAT).
Night Mode can be activated by pressing the NIGHT
button on the remote control. DRC OFF (Default)
appears on the display. While DRC OFF (Default) is still
on the display, continue to press the NIGHT button to
toggle and select the desired night mode. There are
three modes (DRC OFF, SOFT, ON) for you to choose the
extents of compression.
Dynamic Bass Amplified System (dBas)
With “Dynamic Bass Amplified System” (dBas), the
discrete amplifier is located in the receiver so the
subwoofer keeps the power needed to reproduce
powerful effects.
4 settings are available: SOFT, BALANCED, STRONG and
POWERFUL.
Press the SUBWOOFER button to toggle the subwoofer
(dBas) effects level according to your needs.
6 Channel external input
An external decoder (Dts, Dolby
Digital, etc…) or a device with built-in
multi-channel decoder and 6 channel
output connector (DVD player, TV…)
can be connected to the 6CH input. It
is therefore possible to play any future
6 Channels coding (SACD, DVD Audio)
thanks to this connection. The external
decoder device will send the separated audio
information to the receiver that will then amplify the
signal and send to appropriate speakers.
To activate 6 Channel external input, press SOURCE
on the receiver until 6 CH is selected or press dvd/6
channel twice on the remote control
.
Fine Setting of the Components
The receiver can be directly turned on by pressing the
DVD•6CH / SAT•CABLE / TV / TAPE•CD / VCR / TUNER
buttons on the remote control, which also selects the
best surround sound mode. The default surround modes
for different components are listed in the table below.
If you decide to change the surround mode, you can
press the SURROUND button repeatedly to toggle
among the different surround mode choices and select
the one you want.
DOLBY PLII MOVIE => DOLBY PLII MUSIC => DOLBY PL
EMULATION => 3 STEREO => ARENA => JAZZ CLUB =>
THEATER => STADIUM => DISCO => STEREO
The receiver will keep the last selection in memory.
Input Signal Setting
The receiver defaults to the most convenient settings for
your easiest use (see table).
If your connection is different from the default setting,
1. Select the source
2. Press the SETUP button to show setup options.
3. Press the Left or Right adjustment buttons until
ANALOG is displayed.
4. Press the UP or DOWN arrow buttons to select among
analog / optical 1 / optical 2 / coaxial to match your
connection.
Your selection will be stored automatically.
The selected source and input source will be displayed
on the display as long as they are active, except for
some temporary change of display (e.g. adjusting
volume).
Digital Input
Select this setting to play digital signals from a DVD, CD,
LD player, SAT or TV.
Analog Input
Select this setting to play analog signals from a cassette
deck, VCR or turntable.
Source/ If Digital Input (optical If Analog Input
Input or coaxial) is selected is selected
DVD Dolby Digital DOLBY PLII MOVIE
VCR N/A DOLBY PLII MOVIE
SAT Dolby Digital DOLBY PLII MOVIE
CD STEREO STEREO
TAPE N/A STEREO
TV Dolby Digital DOLBY PLII MOVIE
TUNER N/A STEREO
DEFAULT INPUT (as seen on display)
Analog (DVD/ ANL)
Analog (VCR/ ANL)
Analog (SAT/ ANL)
Analog (CD/ ANL)
Analog (TAPE/ ANL)
Analog (TV / ANL)
Built-in Tuner
SOURCE
DVD
VCR
SAT
CD
TAPE
TV
FM/AM
NOTE
Digital input is only available for DVD, SAT, CD
and TV
AVAILABLE INPUT
Analog / Optical 1 / Optical 2 / Coaxial
Analog / - / -
Analog / Optical 1 / Optical 2 / Coaxial
Analog / Optical 1 / Optical 2 / Coaxial
Analog / - / -
Analog / Optical 1 / Optical 2 / -
SOURCE
DVD
VCR
SAT
CD
TAPE
TV
NOTE
If linear PCM source (CD), format will be Dolby
Prologic even with Digital Input.
SUBWOOFER SOURCE
SURROUND
Front Left Speaker
Front Right Speaker
Center Speaker
Listening
Zone
NOTE
Night mode is available only with Dolby Digital
playback.
6 CH. EXTERNAL INPUT
SUBWOOFER SOURCE
SURROUND
PRESE
T
PHONES
NOTE
This function will not be available in 6 channel
input mode
NOTE
This function will not be available in 6 channel
input mode