Filter
Top Products
EN
4
Main Unit
ON/ECO
• Press briefly to turn on and off the unit.
• Press and hold in standby mode to enter ECO
(power saving, without clock display) mode.
The blue standby indicator lights around the
button.
SOURCE - Selects among CD player, TUNER, PC,
PORTABLE PLAYER, USB and AUX.
RECORD-MP3 PLAYER - Starts and stops
recording to mp3 player.
RECORD-USB - Starts and stops recording to USB
device.
/
• In CD, Portable Player, USB or MP3/WMA mode
- Goes to the previous/next track; searches
backwards/forwards through track.
• In Tuner mode - Tunes down/up frequency.
• In Clock or Timer mode - Decreases/increases
hour and minute digit.
- In CD, Portable Player, USB or MP3/WMA
mode - Starts and pauses playback.
TUNE/PRESET
• In CD, Portable Player, USB or MP3/WMA mode
- Stops playback; displays the total number of
folders and total number of tracks on the
current disc when playback is completely
stopped.
• In Recording mode - Stops recording to USB
device.
• In Tuner mode - Selects tune or preset mode.
BAND/INFO
• In CD, USB or MP3/WMA mode - Cycles the
display to show various information (e.g. Track
time, remaining time, ID3 tag, etc.)
• In Portable Player or USB mode - Shows
memory usage.
• In Tuner mode - Selects radio band.
DISC SKIP - Skips to the next disc in CD mode.
DISC 1 / DISC 2 / DISC 3 / DISC 4 /
DISC 5
• Opens or closes the corresponding disc tray if
no disc is loaded in the corresponding tray.
• Enters CD mode and plays the corresponding
CD when disc is loaded in the corresponding
tray.
VOLUME CONTROL
• Adjusts volume.
• In navigation mode - Selects items on a list.
Navigation Buttons
Use the navigation buttons to navigate through
menu.
DELETE - Deletes the selected item.
SELECT
• From stop mode - Enters navigation mode.
• In navigation mode - Plays selected track or
enters selected folder.
BACK - In navigation mode - Exits current
folder and returns to higher level.
/
• In navigation mode - Moves up/down a list.
• In Tuner mode - Selects the previous/next
preset station.
DEMO (on top of the unit) - Turn on/off
demonstration.
DELETE
Tips:
In STANDBY mode, press ON/ECO to
turn the system on in the previously
used mode. Press SOURCE to select the
corresponding mode. Look at the display
icons to identify the current mode.
General Controls
CS806 EN 4/8/06 5:12 PM Page 11