Filter
Top Products
13
EN
Recording to the mp3 Player/USB
Recording to mp3 player or USB device are
basically the same. You can record CD, TUNER or
AUX files to the mp3 player or USB device.
Recording CD to mp3 Player
Normal/High Speed Recording
1. Connect the mp3 player to the USB port, “USB
Connected” will show on the display of the
player.
2. In CD stop mode or CD navigation mode, press
RECORD-MP3 PLAYER on the main unit or
press REC P. PLAYER on the remote
control.
3. Press , or rotate VOLUME CONTROL to
select Normal or High Speed.
4. Press , RECORD-MP3 PLAYER on the main
unit or press REC P. PLAYER on the remote
control to confirm selection.
5. Press , , or to select track and
then press .
The unit will start playback and recording will
begin. REC is displayed.
6. Press , press RECORD-MP3 PLAYER on the
main unit or press REC P. PLAYER on the
remote control to stop recording.
Example (Record all 5 CDs):
1. Make sure ALL DISCS mode is selected by
pressing REPEAT repeatedly.
2. Follow the above step 1-6.
Example (Record only selected
tracks from a CD):
1. Create a CD program by following instructions
under “Setting Up a CD Program” on page 15.
2. In CD stop mode or CD pause mode, press
RECORD-MP3 PLAYER on the main unit or
press REC P. PLAYER on the remote
control.
3. Press , or rotate VOLUME CONTROL to
select Normal or High Speed.
4. Press , RECORD-MP3 PLAYER on the main
unit or press REC P. PLAYER on the remote
control to confirm selection.
5. Press PROGRAM to enter program playback
mode.
Playback and recording will begin. PROGRAM
and REC is displayed.
6. Press , press RECORD-MP3 PLAYER on the
main unit or press REC P. PLAYER on the
remote control to stop recording.
Tips:
To view remaining time (Rem), press
BAND/INFO in recording mode.
Note:
The encoding bitrate for tuner, CD and AUX
signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
Tips:
Recording stops automatically when
CD stops (For example: end of disc is reached).
Tips:
If CD playback is already started,
recording will begin instantly when
RECORD-MP3 PLAYER on the main unit or
REC P. PLAYER on the remote control is
pressed.
If CD playback is stopped, select Normal/High
speed using or then press to
confirm selection. Press , , or to
select track and then to start recording.
Recording will not start until CD starts
playback.
Note:
• High speed recording mode can
save time when recording from CDs. It is
normal that the pitch is increased during
high speed recording.
• High speed recording is for CD recording
only.
CS806 EN 4/8/06 5:12 PM Page 20