Filter
Top Products
16
EN
In CD and USB mode, advanced playback controls
allow you to sample, repeat and random
playback files, set up a Program List. In USB
mode, allow you to rename tracks.
Sampling Tracks
Press INTRO/CT on the remote control to play the
first 10 seconds of each track on the current disc,
all discs in the tray, or turn intro mode off.
INTRO is displayed when sampling is activated.
Repeat
Press REPEAT/RDS on the remote control to
toggle repeat options:
Repeat the current track (REPEAT 1),
Repeat all tracks in USB, PORTABLE PLAYER or
MP3/WMA mode (REPEAT ALL),
Repeat current disc (REPEAT 1 DISC) ,
Repeat all discs (REPEAT ALL DISC), or
Normal playback (ALL DISCS).
Random Playback
Press /PTY on the remote control to turn
on/off random playback. is displayed when it
is activated.
All the tracks on one disc will be shuffled and
played once before shuffling and playing tracks
from the next disc.
Setting Up a Program List
1. In navigation mode, press DISC SKIP to select
disc.
2. Use the navigation buttons to select the track
to add to Program List.
3. Press ADD on the remote control to add
selected track into the next available program
location.
4. Repeat steps 1 to 3 to store more tracks into
program memory.
5. Wait for a few seconds timeout to return to
navigation mode.
Playing a Program List
Press PROGRAM to enter program mode and
then press . Program playback will begin.
PROGRAM is displayed.
Display Program List
1. While CD playback is stopped, press
PROGRAM to enter PROGRAM mode. To
display program list, press .
2. Press or repeatedly to view
each track assignment in the program list.
Deleting from Program List
1. While in PROGRAM mode, press or to
select the program to delete.
2. Press DELETE on the main unit or on the
remote control.
3. Press or to select between No to
cancel and Yes to confirm.
4. Press to confirm selection.
Deleting the Entire Program List
Follow the above steps by press and hold DELETE
on the main unit or on the remote control
instead of press and release.
Renaming Tracks
You can rename tracks in the USB device or the
mp3 player.
1. In USB or PORTABLE PLAYER navigation mode,
press PROGRAM on the remote control to
enter rename mode.
2. Press or to select alphabets.
3. Press to confirm the current alphabet and
move to the next alphabet.
4. Press PROGRAM to confirm and store the new
file name after editing the last alphabet.
5. Press to edit the previous alphabet.
6. Press DELETE to delete the alphabet.
Tips:
Random playback can be activated
simultaneously with repeat 1 disc (randomly
play tracks from one disc repeatedly) or
repeat all discs (randomly play tracks from all
discs repeatedly).
Note:
You can create a program of up to
32 tracks.
Note:
In CD stop mode, press PROGRAM
to toggle between program mode and
normal mode.
Advanced Playback Controls
CS806 EN 4/8/06 5:12 PM Page 23