Filter
Top Products
18
EN
Radio
17
EN
Program
Setting Up Program
1. In navigation mode, use the navigation
buttons to select the track / file to add to
program playlist (Refer to “Navigation
Controls”).
2. Press ADD to save the selected track into the
next available program location.
3. Repeat steps 1 to 2 to store more tracks into
program.
Playing Program
While in stop mode, press PROG to enter
PROGRAM mode. Press PLAY/PAUSE to
start playback.
Display Program List
1. While in stop mode, press PROG to enter
PROGRAM mode.
2. Press UP / DOWN repeatedly to view
each track assignment in the program list.
Remove Track / File from Program
1. In navigation mode, use the navigation
buttons to select the track / file to delete from
Program.
2. Press DEL.
3. Press UP / DOWN to select between
No and Yes.
4. Press RIGHT / ENTER to confirm selection.
Remove the Entire Program
1. While in PROGRAM mode, press and hold DEL.
2. Press UP / DOWN to select between
No and Yes.
3. Press RIGHT / ENTER to confirm selection.
Tips:
You can create playback program of up to 32
tracks from CD, USB and Memory Card mode.
Add to
Prog 02
Prog 01
DISC 01
Audio 03
Tips:
In stop mode, press UP , DOWN or
RIGHT / ENTER to enter navigation
mode and show disc/file menu.
Selecting Tuner Band
1. Press SOURCE to enter Tuner mode.
2. Press BAND to select between FM or AM Radio
band.
Tuning to a Station
Press SKIP BACKWARD or SKIP FORWARD
to select frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
• Press STOP to toggle TUNE and PRESET
mode.
• Press SKIP BACKWARD or SKIP
FORWARD to access the previous or next
preset station.
Auto Preset Programming
(FM only)
Press and hold the CD INFO / BAND button for 2
seconds to scan stations in FM band. The stations
will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is
automatic upon pressing the button. You can
stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press the STOP button to enter TUNE
mode.
2. Press SKIP BACKWARD or SKIP
FORWARD to access the desired
frequency.
3. Press the PROG button once and the most
recently accessed program location flashes on
the display.
5. If a different program location is preferred,
press SKIP BACKWARD or SKIP
FORWARD to move to the desired preset
number (1-32).
6. Press PROG to store the selected frequency at
that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) “STEREO” is
displayed in stereo mode.
Tips:
Your audio system has 32 preset stations.
Preset 01
87.50MHz
Auto Prog
87.50MHz
Preset 2
90.50MHz
CS600 EN 5/3/05 4:17 PM Page 24