Filter
Top Products
26
EN
Selecting Tuner Band
1. Press SOURCE repeatedly to enter Tuner
mode.
2. Press CD INFO / BAND to select between MW,
LW or FM Radio band.
Tuning to a Station
Press SKIP BACKWARD or SKIP FORWARD
to select frequency.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press TUNE/PRESET to toggle TUNE and
PRESET mode.
• Press SKIP BACKWARD or SKIP
FORWARD to access the previous or
next preset station. The display first shows the
preset program number and after a few
seconds, the frequency will be displayed.
(FMPR:01 is FM preset 1)
Auto Preset Programming
Press and hold the CD INFO / BAND button for 2
seconds to scan stations in FM band. The stations
will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is
automatic upon pressing the button. You can
stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press the TUNE/PRESET button to enter TUNE
mode.
2. Press SKIP BACKWARD or SKIP
FORWARD to access the desired
frequency.
3. Press the PROG/SET button once.
4. The most recently accessed program location
will be displayed with the preset location
flashing.
5. If a different program location is preferred,
press SKIP BACKWARD or SKIP
FORWARD to move to the desired preset
number (1-32).
6. Press PROG/SET to store the selected
frequency at that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) “ST” is displayed in
stereo mode.
Radio
Tips:
Your audio system has 32 preset stations.
PR 01 FM
CS580 EN 6/10/04 2:25 PM Page 31