Filter
Top Products
Showing Demonstration
Press DEMO/DIMMER to turn on/off
demonstration mode. The demonstration scrolls
through all display operations.
Setting the Clock
1. Press and hold CLOCK until the hour flashes
on the display.
2. Press SKIP BACKWARD or SKIP
FORWARD to select the hour.
3. Press CLOCK to shift to minute digits.
4. Follow step 2 to set the minute digits.
5. Press PROG/SET to confirm and save settings.
Press STOP to quit setting.
Setting the Timer
1. Press and hold TIMER until ON 0:00
appears with the hour flashing
(ON - timer on time).
2. Press SKIP BACKWARD or SKIP
FORWARD to select the hour.
3. Press TIMER to shift to minute digits.
4. Repeat step 2 to select minute digits.
5. Press TIMER to shift to timer off time setting.
OF 0:00 (timer off time) will show on
the display with the hour flashing.
6. Repeat steps 2 to 4 for timer off time setting.
7. Press TIMER to select source.
8. Press SKIP BACKWARD or SKIP
FORWARD to select among TUNER / TAPE
/ CD MODE / REC TUNER.
9. Press TIMER to set volume.
10. Rotate the VOLUME knob to set the desired
volume level.
11.`Press PROG/SET to confirm and save settings.
Press STOP to quit setting.
Activating the Timer
Press and release TIMER to activate and
deactivate the timer. lights when the timer is
activated.
13
EN
Settings
Note:
When system is ON, you can press CLOCK
to display the current time (CURR TIME)
for about 2 seconds.
0:00
CLOCK SET
ON 0:00
ALARM SET
CS580 EN 6/10/04 2:25 PM Page 18