Filter
Top Products
9
EN
8
EN
Radio
Selecting Tuner Band
1. Press SOURCE on the main unit or TUNER on the
remote control to enter Tuner mode.
2. Press CD INFO/BAND to select Radio
band.
Tip: Your audio system has 32 preset stations.
Tuning to a Station
Press SKIP BACKWARD / SKIP FORWARD
on the main unit or TUNING or on the
remote control to select frequency.
Using Presets
The tuner can be in either TUNE or PRESET mode.
When in preset mode,
• Press TUNE/PRESET on the main system or
PRESET or on the remote control to
access the previous or next preset station.
• The display first shows the preset program
number and after a few seconds, the preset
program and frequency will be displayed.
Auto Preset Programming
Press and hold CD INFO/BAND button for 2 seconds
to scan stations in FM band. The stations will then be
stored as preset channels. A maximum of 32 stations
can be stored. Beware of your preset channels being
erased accidentally because the scanning and storing
process is automatic upon pressing the button. You
can stop the automatic scan by pressing any button,
but the erased stations cannot be recovered.
Manually Setting Presets
1. Press SKIP BACKWARD / SKIP
FORWARD to access the desired
frequency.
2. Press the PROG/SET button once.
3. The most recently accessed program location will
flash on the display.
4. If a different program location is preferred, press
SKIP BACKWARD or SKIP FORWARD
on the main unit or PRESET or on the
remote control to move to the desired preset
number (1-32).
5. Press PROG/SET to store the selected frequency
at that preset.
Suppressing Stereo Signal
Press ST/MONO on the main unit or FM ST. on the
remote control to toggle between FM mono and
stereo for stereo FM stations.
PR 01 FM
07 87.90
PROG
MHz
CD Player
Selecting a Disc
•Press DISC 1, DISC 2, DISC 3, DISC 4, or DISC 5
on the main unit to directly access the
corresponding disc.
•Press DISC SKIP to skip discs.
Searching Through a CD
• Press SKIP BACKWARD / SKIP FORWARD
on the main unit or or on the
remote control to skip to the previous or next
track.
•Press and hold SKIP BACKWARD / SKIP
FORWARD on the main unit or or
on the remote control to search through a CD
while it is playing.
Random Playback
Press MIX/PTY to turn on/off the playing of
tracks in random order.
Sampling Tracks
Press INTRO/CT to play the first 10 seconds of each
track on the current disc, all discs in the tray, or turn
INTRO mode off.
Repeat
Press REPEAT/RDS to repeat the current track
(REPEAT 1), current disc (REPEAT 1 DISC) , all discs
(REPEAT ALL DISC), or turn repeat mode off (ALL
DISC).
Note: You may also press REPEAT to select 1 disc
or all discs before activating MIX function.
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is stopped, press PROG/SET
to enter program mode. The system displays the
next available program number 00 P:01.
2. Press the corresponding disc number on the main
unit or DISC SKIP to select disc.
3. Press SKIP BACKWARD / SKIP FORWARD
on the main unit or TUNING or on
the remote control to select track to enter into
memory.
4. Press PROG/SET to save your settings.
5. Repeat steps 2 to 4 to store more tracks into
program memory.
Playing a Program List
While in PROGRAM mode , press PLAY/PAUSE .
If you are not currently in program mode, press
PROG/SET to enter program mode before pressing
PLAY/PAUSE .
Display Program List
1. While the CD player is stopped, press PROG/SET
to enter PROGRAM mode.
2. Press PROG/SET repeatedly to view each track
assignment in the program list.
Edit Program List
1. Follow “Display Program List” steps until the
location to be edited is displayed.
2. Repeat steps 2 to 4 under “Setting Up a CD
Program “ to edit the track to store into memory.
Deleting Program List
While in PROGRAM mode, press and hold STOP for 3
seconds. They system displays the message CLEAR.
Tips:
• You can create a program of up to 32 tracks.
• Press CD INFO/BAND repeatedly to view
elapsed track time, track number, track remain
time and disc remain time.
Caution: Do not push to force closing of the tray
during CD playback or tray opening.