Perreaux SX25i Stereo Amplifier User Manual


 
19
10
1010
10
Troubleshooting Guide
Please use this guide if you are experiencing any problems with
the SX25i in your system. It will provide possible solutions for
some given symptoms.
There is no
output from
my system
SX25i not turned on
Make sure the SX25i power switch is in the DOWN position.
AC cord not plugged in
Check that the AC cord is plugged into the IEC socket on the rear
of the SX25i.
Mains power not turned on
Check if the power is turn on at the mains socket on the wall.
Interconnect cables not connected
Make sure that the input and output interconnect cables are
plugged in and are connected to the respective RCA sockets on
the rear of the SX25i.
Source not turned on
Check that your source component is plugged in to the mains and
the power is turned on.
Source not set to play
Ensure that your source component is playing the recording you
would like to listen to, and that pause is not pressed.
No volume setting
Make sure that the volume on your SX25i is set to a suitable
level.
SX25i set to incorrect input
Confirm that the input on your SX25i is connected to the
appropriate source output.
Loud speakers not connected
Check that your loud speakers are firmly connected via cables
into the binding posts on the rear of the SX25i.