Filter
Top Products
32
13
1313
13
Specifications
The E160 specifications are detailed in brief and then subsequently in mor
e
detail. In the detailed version, we attempt to explain the significance of eac
h
specification.
The correlation between published specifications and sonic quality can b
e
unreliable. A list of numbers reveals virtually nothing. All technica
l
measurements must be subject to qualitative as well as quantitativ
e
interpretation. Measurements of the E160 reveal excellent results by an
y
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications
In Brief
Rated Power Output: ..................................................................160W
RMS
into 8
Ω
(continuous, per channel, both channels driven from 20Hz-20kHz at < 0.020% THD)
.................................................................................................200W
RMS
into 4
Ω
(continuous, per channel, both channels driven from 20Hz-20kHz at < 0.035% THD)
Frequency Response:................................................10Hz – 30kHz, +0dB –0.5dB
Total Harmonic Distortion
(THD+N)
Typically:.....................................................................0.005%, @ 1kHz into 8
Ω
20Hz to 20kHz: .......................................................................<0.040%, into 8
Ω
Voltage Gain:...............................................................................................28.6dB
Dynamic Headroom
(rated with music)
:.............................................................>1.9dB
Voltage Swing: ........................................................................................... 156V
p-
p
Maximum Current Output:........................................................... 24A per channe
l
Damping Factor:.................................................................>500, @ 1kHz into 8
Ω
Signal to Noise Ratio
Rated Output
(unweighted)
:..............................................................................95dB
Input Sensitivity: ....................................................................................... 1.3V
RMS
Input Impedance:............................................................................................22k
Ω
Smoothing Capacitance:.......................................................................... 20,000μF
Driver Stage:...............................................................................................Class
A
Output Stage:....................................................................................... Class A/AB
Audio Connections
Audio Inputs
Unbalanced:.....................................................................1 pair RCA connectors
Audio Outputs
Speaker:............................................... 1 pair speaker binding posts per channe
l
Other Connections
1 x IEC AC mains input receptacle
Power Consumption
Idle...................................................................................................................40
W
Maximum ......................................................................................................450
W
(at 4Ω rated output)