Filter
Top Products
9
2
22
2
Instant Install
If you are like us, the first thing you will want to do is to play your favourit
e
piece of music through your new E160. The following instructions are writte
n
to enable you to achieve this as quickly as possible. These are no
t
comprehensive instructions, but are designed to enable you to play music now!
Note:
Please take the time to read the E160 manual thoroughly as i
t
incorporates many features, which will enhance its operation.
Placement
The E160 is a convection-cooled amplifier and best results will be achieve
d
when placed on a solid surface with adequate ventilation. DO NOT place on
a
carpeted floor or cover the amplifier!
Turn off associated components
This minimises the potential to damage any other components when connectin
g
your E160 into the system.
Connect preamplifier to E160
Connect the output of your preamplifier to the unbalanced (RCA) inputs at th
e
rear of the E160.
Note:
Try to keep all interconnect cables as far from loudspeaker cables as
possible and well away from all AC mains leads.
Connect speaker cables to the left and right speaker terminals
We recommend using high quality connectors for your speaker cables, spad
e
lugs are the preferable option as they combine a larger surface area with th
e
possibility of a strong mechanical connection; however, high quality banan
a
terminals are also acceptable.
Note:
Be careful to maintain channel integrity, i.e. left to left, right to right, and
phase integrity, positive (+) to positive (+), negative (-) to negative (-).
Switch on preamplifier
Turn on the preamplifier and set the volume to the minimum level.
Switch on E160
After checking the supply voltage compatibility with the voltage rating on th
e
E160 rear panel, insert the power cord-set supplied into the rear of the unit an
d
into the wall. Switch on the socket at the wall and power up the E160 using th
e
switch on the front panel.
Start your source component
Switch on the source component both at the wall and on its front panel. Ensur
e
you have some source material inserted and press play.