Perreaux 6160/P Stereo Amplifier User Manual


 
14
Caution!
Never connect the amplifier’s output terminals to any device other than a
loudspeaker.
Please do not short circuit the amplifier’s output terminals.
Never connect the output of one amplifier to the output terminals o
f
another amplifier.
For more information please refer to Chapter 8 “Maximising System Potential”.
Serial Number
The serial number is unique to your 6160. Please record this number and store i
t
in a safe place. For any service related enquiry, please be prepared to quote the
product serial number to Perreaux personnel or their service representative.
Input Voltage and Fuse Rating
Input Voltage
It is important that the 6160 be operated from the correct AC mains voltage.
This unit is factory set for the voltage applicable to the original country o
f
destination.
The 6160 will operate satisfactorily within a voltage variation of up to ±5% o
f
that voltage at which the unit has been set.
If you require the voltage setting to be altered, e.g. relocation to another area,
city or country, or extraordinarily high or low voltages, please contact you
r
Perreaux dealer. Qualified service personnel can only perform this modification.
Caution!
Never attempt to connect the unit to the incorrect voltage. Severe
damage can result from applying incorrect voltage to the unit.
Fuse Rating
The fuse rating displayed here, refers to the rating of the mains inlet fuse.
For more information on fuse ratings, please refer to Chapter 14
“Specifications”.
Caution!
Never replace the fuse with any other ratings other than the one
specified.
Earth Lift Switch
This switch enables the user to isolate the internal signal earth of the amplifie
r
from the mains earth and is useful if system hum is a problem. Setting this
switch DOWN connects the internal signal earth to mains earth and is the normal
position. Setting to UP disconnects the signal earth from the mains earth.
Note:
Activating this switch has no effect on chassis earth, maintaining the
connection to mains earth.